Zirconia Ceramics Dowel Pin/Locating Pin/Pilotpin

The quality of Zirconia Ceramic Dowel Pins is mainly related to the material and processing quality. Products made of good ceramic materials have good finish first, and secondly, wear resistance and corrosion resistance. Therefore, the quality of the material is a very critical factor. Machining quality is mainly reflected in two aspects: machining accuracy and surface roughness. Let us discuss this topic in detail.

First of all, the surface quality and machining accuracy of zirconia ceramic dowels are closely related. If the surface of the locating pin is very rough, it will inevitably lead to its dimensional accuracy, so it is not a good ceramic product. Secondly, in the process of using parts, the surface of the part is directly in contact with the structure, and even the key to the use of many parts is some surface quality (such as the contact surface of the sliding bearing and the shaft, etc.). In short, there are many ways to judge the quality of the product. If you have doubts about the processing ability of this factory, it is best to let it make a few samples for you first. This will ensure that you have an idea when you place an order in bulk.

Zirconia ceramic positioning pin is a kind of positioning block made of zirconia as raw material. It has the same function as other metal pilotpin, and has very significant advantages in some harsh environments such as acid and alkali resistance.Our company can modify or design the drawings appropriately according to customer needs. You can directly send the drawings to [email protected] and notify by phone or information.

Categories: Ceramic Pin, Zirconia Ceramic