If you are looking for a Aluminum Nitride, , & Silicon Nitride & Machinable Ceramics product customized and mold making services in China, please feel free to contact Pintejin ceramic machining Team.Get Instant Quote:[email protected] .

Friction theory of zirconia toughened alumina

Friction theory of zirconia toughened alumina

With the development of science and technology, the quality requirements of zirconia toughened alumina products are higher and better, so the products have certain friction during preparation, which is what we call friction theory. The following will introduce the friction theory in detail:

1. Zirconia toughened alumina adhesion theory:

The adhesion theory of zirconia toughened alumina believes that under a certain pressure, when zirconia toughened alumina is dry rubbed, it will generate instantaneous high temperature, sometimes even more than 1000e, which will cause zirconia toughened alumina to produce a certain degree of damage. Plastic deformation, the two objects will stick together. Its friction is a pulsating process in which sticking and slipping alternately occur, and this process will make the movement subject to resistance, which is equal to the sum of the resistances when each sticking point is sheared off.

2. Mechanical theory of zirconia toughening alumina:

Under the influence of great pressure, the friction zirconia toughened alumina is in a mixed state of elasticity and plasticity, and the surfaces mesh with each other and contact each other, and when they slide relatively, the meshing points are sheared, so resistance to relative motion.

Zirconia toughened alumina friction is the resistance when each meshing point is sheared. At the same time, molecular attraction will be generated at the contact part of zirconia toughened alumina, just like applying a load, so when the friction couple moves relative to each other, on the one hand, it must overcome the mechanical mutual meshing, and on the other hand, it must overcome the molecular attraction. This causes wear of the material.


Pintejin machining ceramic service include : Alumina Ceramic PartsZirconia CeramicSilicon Carbide CeramicCNC Machined Aluminum Nitride CeramicMachinable Ceramic PartsGlass Ceramic,Macor Ceramic,Powder Metallurgy Dies,Ceramic Injection Molding,Ceramic Dry Pressing,Ceramic Extrusion Dies

Detailed process of zirconia ceramic machining

The zirconia ceramic products we know have very good toughness. They fall intact from a Read more

Introduction to the properties and characteristics of alumina ceramics

Alumina ceramic is an industrial ceramic with high hardness that can only be processed by Read more

Alumina Ceramic Properties and Influencing Factors of Wear Amount

With the continuous development and progress of science and technology, alumina ceramics with superior performance Read more

The principle and characteristics of extrusion molding process

The principle of extrusion molding: the metal powder can be extruded at a certain temperature Read more

Temperature Control During Sintering of Alumina Ceramics

The temperature difference and time of the high-temperature firing treatment after the alumina ceramic blank Read more

Classification and properties of new ceramic materials

New ceramic materials have their unique advantages in performance and are widely used in the Read more

Introduction of new research and new discoveries of engineering ceramic materials

Ceramic materials are typical hard and brittle materials. Before the mid-to-late 20th century, people thought Read more

Introduction of Alumina Refractories

At present, the main raw material for the production of special alumina products is industrial Read more