If you are looking for a Aluminum Nitride, , & Silicon Nitride & Machinable Ceramics product customized and mold making services in China, please feel free to contact Pintejin ceramic machining Team.Get Instant Quote:[email protected] .

Application of ceramic shafts and ceramic bushings

Application of ceramic shafts and ceramic bushings

ceramics

The shaft is sintered with self-lubricated industrial ceramics, and its advantages are very significant. It is not only wear-resistant but also high-temperature resistant ceramics, so it is often used in motor ceramic shafts. The following Pintejin Ceramic Factory will show you the application of ceramic shafts in ceramic bushings. .

Material classification of ceramic shaft and ceramic bushing:

alumina ceramic shafts are divided into 2 types: 99% alumina ceramics and 95% alumina ceramics. 99 ceramics are mainly aimed at some small diameter shafts, mainly serving mid-end customers. 95 ceramics are generally aimed at some large diameter shafts. The main service and low-end customers.

Zirconia ceramic shaft, mainly for some ultra-high-speed rotating water pumps, mainly serve and demand customers. Zirconia Ceramic Shaft Applications and Benefits of Ceramic Shafts and Sleeves:

The brushless DC magnetic drive pump adopts electronic commutation without carbon brush commutation, and adopts high-performance ceramic shaft and ceramic bushing. . The stator part and rotor part of the magnetically isolated water pump are completely isolated. The stator part and the circuit board part are potted with epoxy resin, which is 100% waterproof. The rotor part uses permanent magnets, which can adjust various required parameters through the winding of the stator. Can operate at wide voltage.

Advantages: long life, noise below 35dB, can be used for hot water circulation, can be installed underwater and completely waterproof, the shaft of the pump is made of high-performance ceramics, with high precision and good shock resistance.

Pintejin Ceramic Factory specializes in the production of alumina zirconia ceramic shafts, ceramic plungers, ceramic rods and other products, featuring wear resistance, corrosion resistance, high temperature resistance, and high dimensional accuracy. Ceramic shafts are widely used in motor products such as water pumps, oil pumps, CPU fans, heat fans, and high-pressure cleaners. Products with various specifications and precisions can be customized according to customer requirements. Welcome to negotiate cooperation with drawings and samples.

 

 



Pintejin machining ceramic service include : Alumina Ceramic PartsZirconia CeramicSilicon Carbide CeramicCNC Machined Aluminum Nitride CeramicMachinable Ceramic PartsGlass Ceramic,Macor Ceramic,Powder Metallurgy Dies,Ceramic Injection Molding,Ceramic Dry Pressing,Ceramic Extrusion Dies


Will zirconia ceramics gradually replace alumina ceramics in the industry?

Alumina ceramics have been widely used in recent years, but due to the rise of Read more

Ceramic Plate Precision Machining Technology

The damage of the ceramic plate is mainly caused by the unstable propagation of cracks. Read more

Introduce the polishing of mirror zirconia ceramics

General ceramic materials will have burrs on the surface when they are sintered. In order Read more

Why does the color of alumina ceramics change?

Most ceramic products are basically white, and the color of alumina ceramics is of course Read more

Introduction to the classification of zirconia ceramic binders

Zirconia ceramic binders Wax-based or oil-based binders, water-based binders and solid polymer solutions. Zirconia ceramic Read more

Introduction to the process and method of ceramic molding process

Ceramic molding process, including specific methods and molding equipment for ceramic molding. The ceramic molding Read more

Introduction to deformation requirements of zirconia ceramic tensile specimens

Definition of Structural Ceramics

Structural ceramic materials are divided into two categories: structural materials and functional materials. When a Read more

Zirconia ceramic laser machining method

Zirconia ceramic laser machining uses a uniform laser beam with high energy density (108-1O10W/cm2) as Read more