If you are looking for a Aluminum Nitride, , & Silicon Nitride & Machinable Ceramics product customized and mold making services in China, please feel free to contact Pintejin ceramic machining Team.Get Instant Quote:[email protected] .

What should be paid attention to when using wear-resistant ceramic rods?

What should be paid attention to when using wear-resistant ceramic rods?

With the continuous development and progress of science and technology, wear-resistant ceramic rods with superior performance have been widely used in various fields, so what should be paid attention to when using wear-resistant ceramic rods? Next, Pintejin Ceramics will introduce to you.

1. The surface temperature should not be too high

Even a very durable wear-resistant ceramic rod needs to pay attention to the temperature of the use environment, because its service time will be shortened due to the continuous increase of the use temperature.

When the temperature of the wear-resistant ceramic rod exceeds the upper limit of the furnace, the oxidation rate will be accelerated and the service time will be shortened little by little, so the user tries to avoid making the surface temperature too high.

Wear-resistant ceramic rod

2. Timely adjust the voltage

If the wear-resistant ceramic rod is oxidized during use, the resistance will gradually increase, so in order to maintain the normal temperature of the furnace, the operating voltage should be increased in time.

If the voltage is increased to the maximum limit of the transformer used and still cannot meet the requirements, you can choose to stop the furnace and change the wiring method of the rod before continuing to use it.

If the new furnace starts to send electricity, the voltage should be increased in time to avoid the occurrence of broken rods. The initial voltage should be half of the rated voltage, and then slowly increase after it is normal.

Wear-resistant ceramic rod

3. Avoid overloading

Even if the production process of wear-resistant ceramic rods is refined, the quality of the products produced cannot be overloaded. If the wear-resistant ceramic rods break or heat unevenly for some reason.

And when its part shows incandescent or dark red phenomenon for a period of time, it means that the part of the rod has begun to age, and the resistance of the section has been too different, so the furnace should be stopped in time to repair and replace the rod.

The above is what you need to pay attention to when using wear-resistant ceramic rods brought by Pintejin Ceramics. Pintejin Ceramics is a manufacturer specializing in the production and machining of ceramics, focusing on the machining of alumina ceramic parts and zirconia ceramics, and can process ceramic products according to your needs.



Pintejin machining ceramic service include : Alumina Ceramic PartsZirconia CeramicSilicon Carbide CeramicCNC Machined Aluminum Nitride CeramicMachinable Ceramic PartsGlass Ceramic,Macor Ceramic,Powder Metallurgy Dies,Ceramic Injection Molding,Ceramic Dry Pressing,Ceramic Extrusion Dies


Will zirconia ceramics gradually replace alumina ceramics in the industry?

Alumina ceramics have been widely used in recent years, but due to the rise of Read more

Ceramic Plate Precision Machining Technology

The damage of the ceramic plate is mainly caused by the unstable propagation of cracks. Read more

Introduce the polishing of mirror zirconia ceramics

General ceramic materials will have burrs on the surface when they are sintered. In order Read more

Why does the color of alumina ceramics change?

Most ceramic products are basically white, and the color of alumina ceramics is of course Read more

Introduction to the classification of zirconia ceramic binders

Zirconia ceramic binders Wax-based or oil-based binders, water-based binders and solid polymer solutions. Zirconia ceramic Read more

Introduction to the process and method of ceramic molding process

Ceramic molding process, including specific methods and molding equipment for ceramic molding. The ceramic molding Read more

Introduction to deformation requirements of zirconia ceramic tensile specimens

Definition of Structural Ceramics

Structural ceramic materials are divided into two categories: structural materials and functional materials. When a Read more

Zirconia ceramic laser machining method

Zirconia ceramic laser machining uses a uniform laser beam with high energy density (108-1O10W/cm2) as Read more